Showing posts with label fork. Show all posts
Showing posts with label fork. Show all posts

Sunday, 26 May 2013

Fork modification and glassblasting

Time to modify the fork; The lower wire holder will be replaced with a new chrome version for improved looks.
 Ugly loop has to go.

 Angle grinder does the trick.

 The fork was glass blasted and etch primed, and should be ready for some paint... As soon as I can figure out which color to spray. 

Also got time to prime the rear new rear hub, seen in the back of the picture.

Friday, 13 July 2012

Additional fork pictures

Just grabbed some quick photos from the garage today, primarily showing the bent fork rods that will need replacement.

 Some parts haven't made it to the garage yet...

Bent fork rods, will need replacement.

Forks completely dismantled and checked. Several of the parts will be replaced.

Just a visual of degreased engine parts.


The engine will receive several upgrades and replacement parts. 

Sunday, 8 July 2012

Battery tray chop and dismantling of fork

A nice day here in Stavanger, time to spend some quality time with the SX200! The chassis was brought out in the sun, and the frame was stripped for all remaining screws/items that was still fixed to the chassis. Rear badge holder, some screws for the rear plate, and some screws remaining on the floor was taken away.

Since the scooter is receiving a TS1 setup, the battery tray needs to be chopped away.

Battery tray chopped away.

Further on, a full disassebly of the fork was carried out, dismantling all parts. The parts were degreased, sadly so was also my camera... so no more pictures of the dismantled fork today.

The fork rods were to my surprise bent, so new ones need to be sourced for rebuild. I've already ordered several parts rebuild parts for the fork, but most likely I've not added those. Anyway: Fork is now ready for sandblasting.

So is chassis.