Battery tray chop and dismantling of fork

A nice day here in Stavanger, time to spend some quality time with the SX200! The chassis was brought out in the sun, and the frame was stripped for all remaining screws/items that was still fixed to the chassis. Rear badge holder, some screws for the rear plate, and some screws remaining on the floor was taken away.

Since the scooter is receiving a TS1 setup, the battery tray needs to be chopped away.

Battery tray chopped away.

Further on, a full disassebly of the fork was carried out, dismantling all parts. The parts were degreased, sadly so was also my camera... so no more pictures of the dismantled fork today.

The fork rods were to my surprise bent, so new ones need to be sourced for rebuild. I've already ordered several parts rebuild parts for the fork, but most likely I've not added those. Anyway: Fork is now ready for sandblasting.

So is chassis.